VKBA6967 Wheel Bearing Kits For DAIHATSU
The DUHUI Bearing VKBA6967 is a complete front wheel bearing kit designed for Daihatsu BeGO 4×4 models from 2005 onward. This comprehensive kit includes one bearing, one circlip, one nut, and one split pin, matching OE specifications including 90043-63314. It is directly interchangeable with SKF VKBA6967, SNR R179.27, and QUINTON HAZELL QWB1216.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK855 |
| Part Number | VKBA6967 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 64.00 mm (2.520 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a front wheel bearing kit designed for Daihatsu BeGO applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK855
OE Numbers: 90043-63314, 90043-63360, 90043-63361, 90043-63360, 90043-63361
Reference Numbers (Interchange):
SKF: VKBA6967
SNR: R179.27
QUINTON HAZELL: QWB1216, QWB885, QWB924
SPIDAN: 27015
NIPPARTS: J4706011
Vehicle Fitment
DAIHATSU: BEGO 1.3 DVVT 4×4 – 2005 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, nut, and split pin – all components for a full bearing replacement
- Specifically engineered for Daihatsu BeGO 4×4 front axle applications
- Direct interchange with SKF VKBA6967, SNR R179.27, and QUINTON HAZELL QWB1216
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, nut x1, and split pin x1
- Confirm front axle fitment for your specific Daihatsu BeGO model (2005 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Daihatsu service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
