VKBA6839 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA6839 is a complete rear wheel bearing kit designed for Honda Civic Si and Hatchback models from 2002 to 2005. This kit includes one hub assembly and one retaining nut, matching OE specifications including 42200S5A008 and 42200S5AJ01. It is directly interchangeable with SKF VKBA6839, SNR R174.53, and FAG 713617810.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK786 |
| Part Number | VKBA6839 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Wheel Stud Quantity | 5 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Civic applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK786
OE Numbers: 42200S5A008, 42200S5AJ01, J4714034, QWB1248
Reference Numbers (Interchange):
SKF: VKBA6839
SNR: R174.53
FAG: 713617810
BRT: BRT6839
NIPPARTS: J4714034
QUINTON HAZELL: QWB1248
Vehicle Fitment
HONDA: CIVIC Si, Hatchback – 2002-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor and retaining nut – all components for a full hub replacement
- Specifically engineered for Honda Civic Si and Hatchback rear axle applications
- Direct interchange with SKF VKBA6839, SNR R174.53, and FAG 713617810
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1 and nut x1
- Confirm rear axle fitment for your specific Honda Civic Si or Hatchback model (2002-2005)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the retaining nut and four flange bolts to Honda service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
