VKBA5412 Wheel Bearing For MERCEDES-BENZ
The DUHUI Bearing VKBA5412 wheel bearing kit is a double-row ball bearing unit designed for Mercedes-Benz Atego commercial vehicle applications. With an 82 mm bore, 140 mm outer diameter, and 115 mm width, this bearing supports both radial and axial loads in rear axle and wheel hub positions. It matches OE specification VKBA5412 and is cross-referenced with SET1310 and 179815005, with confirmed fitment for Mercedes-Benz Atego 1014 models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB1138 |
| Part Number | VKBA5412 |
| Product Type | Wheel Bearing – Double Row Ball Bearing |
| Fitting Position | Rear Axle / Wheel Hub |
| Bore Diameter (d) | 82.00 mm (3.228 inch) |
| Outer Diameter (D) | 140.00 mm (5.512 inch) |
| Width (B) | 115.00 mm (4.528 inch) |
| Material | High Carbon Chrome Steel |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB1138
OE Numbers:
VKBA5412
Reference Numbers (Interchange):
SET1310
179815005
Vehicle Fitment
MERCEDES-BENZ ATEGO: 1014, 1014 L 1998-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row ball bearing design provides high radial and axial load capacity – suitable for heavy-duty commercial vehicle rear axle and wheel hub applications.
- Metric configuration with 82 mm bore and 140 mm outer diameter matches Mercedes-Benz OE VKBA5412 for direct replacement.
- Pre-assembled unit simplifies installation, requiring no shims or complex adjustments.
- Heat-treated bearing steel with precision-ground raceways ensures consistent performance and long service life in demanding commercial vehicle applications.
- Cross-referenced with SET1310 and 179815005 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (82.00 mm) and outer diameter (140.00 mm) match your housing and shaft before installation.
- This unit is designed for rear axle fitment on Mercedes-Benz Atego models – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Press the bearing unit squarely into the housing – never apply force directly through the rolling elements.
- Torque all fasteners to Mercedes-Benz service manual specifications for the Atego chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
