VKBA3965 Wheel Bearing Kits For SUZUKI
The DUHUI Bearing VKBA3965 wheel bearing kit is an OE-spec replacement solution for a wide range of Suzuki and Nissan models. This comprehensive kit includes the bearing, circlip, and nut for a complete front or rear hub service. Manufactured to match original equipment specifications including SKF VKBA3965, SNR R177.37, and FAG 713623520, this kit delivers reliable performance for compact passenger car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK566 |
| Part Number | VKBA3965 |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 62.00 mm (2.441 inch) |
| Width | 40.00 mm (1.575 inch) |
| Fitting Position | Front and Rear Axle |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Nut |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK566
OE Numbers: 43440-84F00, 43440-M79F00, 43440-58J00, 43440-78A00, 43440-M68K00
Reference Numbers (Interchange):
SKF: VKBA3965
SNR: R177.37
FAG: 713623520
MOOG: SZ-WB-12051
BRT BEARINGS: PWK1514
Vehicle Fitment
SUZUKI ALTO VI (FF): 1.1 (RF410) 2004-2008
SUZUKI SWIFT III (MZ, EZ): 1.3 4×4 (RS413, ZC11S) 2005-2015
SUZUKI IGNIS I (FH): 1.3 4WD (RG413) 2000-2003
SUZUKI IGNIS II (MH): 1.5 4×4 (RM415) 2003-2008
SUZUKI WAGON R+ (MM): 1.0 (RB310) 2001-2006
NISSAN PIXO (UA0): 1.0 2009-2013
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit with bearing, circlip, and nut included for a single-source replacement solution.
- Precision-machined to match OE dimensions: 35mm inner diameter, 62mm outer diameter, and 40mm width, ensuring proper fitment on both front and rear axle applications.
- Designed specifically for Suzuki and Nissan compact car applications, supporting a wide range of models including Alto, Swift, Ignis, Wagon R+, and Pixo.
- Cross-references with multiple leading brands including SKF VKBA3965, SNR R177.37, and FAG 713623520 for easy interchangeability in the aftermarket.
- OE-compatible replacement for multiple Suzuki part numbers including 43440-84F00 and 43440-M79F00.
Installation Notes
- This kit is designed for both front and rear axle fitment on compatible Suzuki and Nissan models. Verify positioning against your original component before installation.
- Clean the hub and axle shaft surfaces thoroughly before installation to ensure proper bearing seating and prevent premature wear.
- Ensure the circlip is properly seated in its groove to secure the bearing in place.
- Torque the hub retaining nut to manufacturer specifications; over-tightening can damage the bearing.
- For vehicles equipped with ABS, verify the sensor ring is clean and undamaged before installation.
- We recommend professional installation to ensure correct bearing preload and to verify fitment against original components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and hub assemblies to OE specifications. Contact us
