VKBA3780 Wheel Bearing Kits For MAZDA KIA
The DUHUI Bearing VKBA3780 wheel bearing kit is a front/rear axle replacement kit designed for Mazda 323 (BG, BA, BJ) and Kia Sephia / Shuma models. This comprehensive kit includes the bearing, circlip, securing nut, and oil seal, providing all components needed for a complete wheel bearing replacement. It matches OE specifications including 0K20133047 and B45533047C, with cross-references to SKF VKBA3780, QUINTON HAZELL QWB905, and NIPPARTS J4703012.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK518 |
| Part Number | VKBA3780 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front / Rear Axle |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Nut, 1 Oil Seal |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 80.00 mm (3.150 inch) |
| Width | 44.00 mm (1.732 inch) |
| Material | GCr15 Bearing Steel |
| Weight | 1.20 kg (2.65 lb) |
Note: Dimensional data is based on SKF and aftermarket manufacturer specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK518
OE Numbers:
0K20133047, B45533047C, 0K201-33-047, B455-33-047C
Reference Numbers (Interchange):
SKF: VKBA3780
NIPPARTS: J4703012
QUINTON HAZELL: QWB905
A.B.S.: 201154
AUTOKIT: 01.97555
Vehicle Fitment
MAZDA 323 C IV (BG): 1.3 (BG3S) 1989-1994
MAZDA 323 P V (BA): 1.3 16V 1996-1998
MAZDA 323 F VI Hatchback (BJ): 1.3 16V (BJ3P, BJ14) 1998-2001
KIA SEPHIA (FA): 1.5 i 1996-1997
KIA SEPHIA Saloon (FA): 1.5 i GTX 1996-1997
KIA SHUMA Saloon (FB): 1.5 1996-1998
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes bearing, circlip, nut, and oil seal – all components needed for a full hub rebuild on compatible Mazda and Kia models.
- Designed for Mazda 323 (BG, BA, BJ) and Kia Sephia / Shuma front/rear axle applications – verified fitment for 1989-2001 model years.
- Precision-engineered bearing with 32 mm inner diameter and 80 mm outer diameter matches OE specifications for direct replacement.
- Cross-referenced with SKF VKBA3780, NIPPARTS J4703012, and QUINTON HAZELL QWB905 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (32.00 mm) and outer diameter (80.00 mm).
- This kit is designed for front/rear axle fitment on compatible Mazda and Kia models – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Replace the included oil seal during installation to prevent lubricant leakage and contamination.
- Torque the securing nut and wheel bolts to Mazda/Kia service manual specifications for the respective chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
