VKBA3721 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3721 is a complete rear wheel bearing kit designed for Hyundai Santamo 4×4 models from 1999 to 2002. This kit includes one bearing, one circlip, and one split pin, matching OE specifications including 52710M2010. It is directly interchangeable with SKF VKBA3721, SNR R184.62, and FAG 713631111.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK503 |
| Part Number | VKBA3721 |
| Inside Diameter | 32.00 mm (1.260 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Hyundai Santamo 4×4 applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK503
OE Numbers: MB663547, MR491462, 52710M2010
Reference Numbers (Interchange):
SKF: VKBA3721
SNR: R184.62
FAG: 713631111
BRT: BRT3721
RUVILLE: 5552
Vehicle Fitment
HYUNDAI: SANTAMO 2.0 16V 4×4 – 1999-2002
KIA: CARENS (FJ) 2.0 4×4 – 1999-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai Santamo and Kia Carens 4×4 rear axle applications
- Direct interchange with SKF VKBA3721, SNR R184.62, and FAG 713631111
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and split pin x1
- Confirm rear axle fitment for your specific Hyundai Santamo 4×4 model (1999-2002)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
