VKBA3301 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA3301 is a complete rear wheel bearing kit designed for Honda Prelude III models from 1987 to 1992. This kit includes one bearing, one circlip, and one retaining nut, matching OE specifications including 44300-SF1-004 and 44300-SF1-008. It is directly interchangeable with SKF VKBA3301, BRT BRT3301, and NIPPARTS J4704013.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK218 |
| Part Number | VKBA3301 |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 55.00 mm (2.165 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Prelude applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK218
OE Numbers: 44300-SF1-004, 44300-SF1-008, ADH28216, J4704013
Reference Numbers (Interchange):
SKF: VKBA3301
BRT: BRT3301
NIPPARTS: J4704013
RUVILLE: 2816
BLUE PRINT: ADH28216
Vehicle Fitment
HONDA: PRELUDE III (BA) 2.0 i EX 16V Cat (BA4) – 1987-1992
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, and retaining nut – all components for a full bearing replacement
- Specifically engineered for Honda Prelude III rear axle applications
- Direct interchange with SKF VKBA3301
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and nut x1
- Confirm rear axle fitment for your specific Honda Prelude III model (1987-1992)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
