VKBA3236 Wheel Bearing Kits For SUBARU
The DUHUI Bearing VKBA3236 rear wheel bearing kit is an OE-spec replacement solution for a wide range of Subaru models including Forester, Impreza, Legacy, and Outback. This comprehensive kit includes the bearing, three shaft seals, nut, and circlip for a complete rear hub service. Manufactured to match original equipment specifications including SKF VKBA3236, SNR R181.10, and FAG 713622150, this kit delivers reliable performance for Subaru AWD applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK182 |
| Part Number | VKBA3236 |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 37.00 mm (1.457 inch) |
| Fitting Position | Rear Axle |
| Kit Contents | 1 Bearing, 3 Shaft Seals, 1 Nut, 1 Circlip |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK182
OE Numbers: 28016AA020, 28016AA020NT
Reference Numbers (Interchange):
SKF: VKBA3236
SNR: R181.10
FAG: 713622150
BRT BEARINGS: PWK1514
NIPPARTS: J4718016
Vehicle Fitment
This rear wheel bearing kit is compatible with a wide range of Subaru AWD models:
SUBARU FORESTER (SG): 2.5 AWD (SG9) 2005-2008
SUBARU FORESTER (SG): 2.0 AWD 2002-2008
SUBARU IMPREZA (GD, GG): 2.0 AWD 2002-2007
SUBARU IMPREZA (GD, GG): 2.5 AWD 2004-2007
SUBARU LEGACY IV (BL, BP): 2.5 AWD 2003-2009
SUBARU OUTBACK (BL, BP): 2.5 AWD 2003-2009
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit with bearing, three shaft seals, nut, and circlip included for a single-source replacement solution.
- Precision-machined to match OE dimensions: 35mm inner diameter, 72mm outer diameter, and 37mm width, ensuring proper fitment on rear axle applications.
- Designed specifically for Subaru Forester, Impreza, Legacy, and Outback AWD applications.
- Cross-references with multiple leading brands including SKF VKBA3236, SNR R181.10, and FAG 713622150 for easy interchangeability in the aftermarket.
- OE-compatible replacement for Subaru part numbers 28016AA020 and 28016AA020NT.
Installation Notes
- This kit is designed for rear axle fitment on Subaru models. Verify positioning before installation.
- Clean the hub and axle shaft surfaces thoroughly before installation to ensure proper bearing seating and prevent premature wear.
- Replace all three shaft seals included in the kit – inspect the axle shaft surface for scoring or damage that could compromise seal performance.
- Ensure the circlip is properly seated in its groove to secure the bearing in place.
- Torque the hub retaining nut to Subaru factory specifications; over-tightening can damage the bearing.
- We recommend professional installation to ensure correct bearing preload and to verify fitment against original components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and hub assemblies to OE specifications. Contact us
