VKBA1991 Wheel Bearing Kits For DAEWOO
The DUHUI Bearing VKBA1991 is a complete rear wheel bearing kit designed for Daihatsu Feroza Hard Top 4×4 models from 1988 to 1999. This kit includes one bearing, one wheel hub ring, and two shaft seals, matching OEM specifications 9004363028 and 9004363100. It is directly interchangeable with SKF VKBA1991 and SNR R179.14.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK156 |
| Part Number | VKBA1991 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 80.00 mm (3.150 inch) |
| Width | 21.00 mm (0.827 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Hub Ring x1, Shaft Seal x2 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Daihatsu Feroza applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK156
OE Numbers: 9004363028, 9004363100, 4218587601
Reference Numbers (Interchange):
SKF: VKBA1991
SNR: R179.14
FAG: 713616060
ASHIKA: 4426010
JAPANPARTS: KK26010
JAPKO: 426010
MAXGEAR: 330958
Vehicle Fitment
DAIHATSU: FEROZA Hard Top (F300) 1.6 i 16V 4×4 – 1988-1999, FEROZA Hard Top (F300) 1.6 16V 4×4 – 1988-1999
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, hub ring, and two shaft seals – all components for a full bearing replacement
- Specifically engineered for Daihatsu Feroza 4×4 rear axle applications
- Direct interchange with SKF VKBA1991 and SNR R179.14
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- Shaft seals included to prevent contaminant ingress and retain lubricant
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, hub ring x1, and shaft seal x2
- Confirm rear axle fitment for your specific Daihatsu Feroza model (1988-1999)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Install the shaft seals with the correct orientation to prevent leaks
- Torque the retaining nut to Daihatsu service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
