Universal Joint MB-000345 For MITSUBISHI
The DUHUI Bearing MB-000345 universal joint is a direct-fit OE replacement for select Mitsubishi L200 and Pajero models. This 25mm x 64mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including MB-000345, MA126433, and MR196837, this universal joint delivers reliable performance for compatible Mitsubishi applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | MB-000345 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Diameter (Cup) | 25.00 mm (0.984 inch) |
| Length | 64.00 mm (2.520 inch) |
| Vehicle Application | Mitsubishi L200, Pajero |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
MB-000345, MA126433, MR196837
Reference Numbers (Interchange):
GMB: GUM-81
Matsuba: UJ625
PWS: PWSM2246211
Vehicle Fitment
MITSUBISHI L200 (K3_T, K2_T, K1_T, K0_T): 2.5 D (K14T) 1986-1996
MITSUBISHI PAJERO I (L04_G, L14_G): 2.5 TD (L044G, L049G) 1989-1990
MITSUBISHI PAJERO III (V7_W, V6_W): 3.2 TDi (V68W) 2000-2006
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi driveline applications. Matches OEM specifications MB-000345, MA126433, and MR196837.
- 25.00 mm cup diameter and 64.00 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands high torque loads and angular misalignment common in 4WD applications.
Installation Notes
- Verify the 25.00 mm cup diameter matches your driveshaft yoke before installation.
- Check that the 64.00 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mitsubishi manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
