Universal Joint 39625-U3825 For NISSAN
The DUHUI Bearing 39625-U3825 universal joint is a direct-fit OE replacement designed for Nissan Patrol, Terrano, and select 4×4 models. This 28mm x 53mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 39625-U3825, 37125-C9425, and 37125VB925, this universal joint delivers reliable performance for compatible Nissan 4×4 applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 39625-U3825 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 28.00 mm (1.102 inch) |
| Length | 53.00 mm (2.087 inch) |
| Vehicle Application | Nissan Patrol, Terrano, 4×4 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
39625-U3825, 37125-C9425, 37125VB925
Reference Numbers (Interchange):
GMB: GUM-91
Matsuba: UJ640
Vehicle Fitment
NISSAN PATROL GR IV (Y60, GR): 2.8 TD (Y60A) 1988-1997
NISSAN PATROL III/1 Hardtop (K160): 3.3 TD (K160) 1983-1988
NISSAN TERRANO I (WD21): 2.7 TD 4WD (LBYD21) 1989-1996
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Nissan 4×4 driveline applications. Matches OEM specifications including 39625-U3825, 37125-C9425, and 37125VB925.
- 28.00 mm outside diameter and 53.00 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment common in 4×4 and off-road applications.
Installation Notes
- Verify the 28.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 53.00 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Nissan manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
