Universal Joint 1757-89-251 For MAZDA
The DUHUI Bearing 1757-89-251 universal joint is a direct-fit OE replacement designed for Mazda B-Series, E-Series, and van applications. This 26.5mm x 70.85mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 1757-89-251, 8BS1-25-060, and N090-89-251, this universal joint delivers reliable performance for compatible Mazda commercial vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 1757-89-251 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 26.50 mm (1.043 inch) |
| Length | 70.85 mm (2.789 inch) |
| Weight | 0.400 kg |
| Vehicle Application | Mazda B-Series, E-Series |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
1757-89-251, 8BS1-25-060, N090-89-251
Reference Numbers (Interchange):
GMB: GUM-92
Matsuba: UJ615
Vehicle Fitment
MAZDA B-SERIES (UF): 2.5 D 4WD 1996-1999
MAZDA E Bus (SG): 2.5 TD (SGLW, SGL35) 1995-1999
MAZDA E Van (SR2): 2200 D 4WD 1991-2003
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda B-Series and E-Series driveline applications. Matches OEM specifications including 1757-89-251, 8BS1-25-060, and N090-89-251.
- 26.50 mm outside diameter and 70.85 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment common in commercial vehicle applications.
Installation Notes
- Verify the 26.50 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 70.85 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mazda manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
