UC3C33060E Wheel Hub Bearing For FORD
The DUHUI UC3C33060E is a complete front wheel hub bearing assembly designed for Ford Ranger (TKE) models from 2011 onward. This 6-bolt hub assembly features an outer diameter of 162 mm, height of 93 mm, and 28 input shaft teeth, matching OE specifications UC3C33060E and AB311106BF. It is directly interchangeable with FREMAX FWB-0690 for reliable performance in 4×4 and 4×2 applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2476 |
| Part Number | UC3C33060E |
| Mounting Location | Front Axle |
| Outside Diameter | 162.00 mm (6.378 inch) |
| Height | 93.00 mm (3.661 inch) |
| Number of Holes | 6 |
| Number of Input Shaft Teeth | 28 |
| Weight | 3.06 kg (6.75 lb) |
Note: Dimensional data is based on available sources. This is a front wheel hub bearing assembly designed for Ford Ranger applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2476
OE Numbers: UC3C33060E, AB311106BF
Reference Numbers (Interchange):
FREMAX: FWB-0690
FORD: UC3C33060E, AB311106BF, UC3C33060D
1746044, 1786222
Vehicle Fitment
FORD: RANGER (TKE) 2.2 TDCi XL 4×4 – 2011 onward
FORD: RANGER (TKE) 2.5 Sport 4×2 CS Flex – 2012-2019
FORD: RANGER (TKE) 3.2 TDCi LTD 4×4 – 2011 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel hub bearing assembly designed for Ford Ranger (TKE) applications
- 6-bolt design with 162 mm outer diameter and 28 input shaft teeth for precise fitment
- Specifically engineered for both 4×4 and 4×2 Ranger variants
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Direct interchange with OE numbers UC3C33060E, AB311106BF, and FREMAX FWB-0690
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions (outer diameter 162 mm, height 93 mm, 28 splines) against your original part before installation
- Confirm fitment for your specific Ford Ranger model and drivetrain (4×4 or 4×2)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the axle nut and mounting bolts to Ford service manual specifications
- After installation, verify smooth wheel rotation without noise or binding
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
