UC206 Insert Spherical Bearing
The DUHUI Bearing UC206 insert spherical bearing is an OE-spec replacement component for industrial, agricultural, and material handling equipment. This wide inner ring ball bearing features a spherical outer diameter for self-alignment in mounted bearing assemblies, compensating for shaft misalignment in demanding applications. Manufactured to match original equipment specifications including UC206, this unit delivers reliable performance for mounted bearing applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK137 |
| Part Number | UC206 |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outside Diameter (DSP) | 62.00 mm (2.441 inch) |
| Width (B) | 38.10 mm (1.500 inch) |
| Outer Ring Width (C) | 19.00 mm (0.748 inch) |
| Distance Raceway (S) | 15.90 mm (0.626 inch) |
| Grease Fitting (g) | 22.20 mm (0.874 inch) |
| Grease Fitting Thread (ds) | M6×1.0 |
| Dynamic Load Rating (Cr) | 19,500 N (4,383 lbf) |
| Static Load Rating (C0r) | 11,300 N (2,540 lbf) |
| Locking Type | Set Screw (2 Screws) |
| Seal Type | Double Sealed (RSR on both sides) |
| Weight | 0.34 kg (0.75 lb) |
| Temperature Range | -20 to 100 °C (-4 to 212 °F) |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK137
OE Numbers: UC206, UC206E
Reference Numbers (Interchange):
Timken: UC206
SKF: UC206
FYH: UC206
AMI Bearings: UC206
TRITAN: UC206
SNR: UC206G2T04
Product Features
- Wide inner ring design provides effective shaft support for a broad range of industrial applications.
- Spherical outer diameter compensates for shaft misalignment in mounted bearing housings.
- Set screw locking mechanism secures the bearing to the shaft, ideal for reversing load applications.
- Double RSR seals on both sides protect against contaminants and retain lubricant.
- Relubricatable via M6×1.0 lubrication hole with grease fitting for extended service life.
- Premium chrome steel construction with super-finished raceways and grade 10 balls for smooth, low-noise operation.
Installation Notes
- This insert bearing is designed for use in customer-supplied housings with corresponding spherical inside surfaces.
- Before installation, clean the shaft and housing bore thoroughly and inspect for damage or wear.
- Tighten set screws to the manufacturer’s specified torque – over-tightening can distort the bearing inner ring.
- Relubricate through the M6×1.0 grease fitting after installation to ensure proper lubrication.
- We recommend professional installation to verify fitment and ensure correct shaft alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces insert spherical bearings, wheel bearing kits, and hub assemblies to OE specifications. Contact us
