TUNLANDE5/E72WD Wheel Hub Bearing For BAIC-FOTON
The DUHUI TUNLANDE5/E72WD wheel hub bearing is a direct-fit front axle replacement designed for FOTON TUNLAND E5 and E7 2WD models. This front wheel hub bearing meets OE specification TUNLANDE5/E72WD, delivering reliable performance in the aftermarket. It features a 5-bolt flange design for enhanced load distribution and stability.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01316 |
| Part Number | TUNLANDE5/E72WD |
| Position | Front Axle |
| Drive Type | 2WD |
| Bolt Holes | 5 |
Note: This is a front wheel hub bearing assembly designed for FOTON TUNLAND 2WD applications with a 5-bolt flange. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01316
OE Numbers: TUNLANDE5/E72WD
Reference Numbers (Interchange):
FOTON: TUNLANDE5/E72WD
Vehicle Fitment
FOTON: Tunland E5 (2WD), Tunland E7 (2WD)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for FOTON Tunland E5 and E7 2WD models
- 5-bolt flange design provides enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number TUNLANDE5/E72WD for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number TUNLANDE5/E72WD on your original bearing before installation
- Confirm 2WD front axle fitment for your specific FOTON Tunland model (E5 or E7)
- Confirm the 5-bolt flange matches your FOTON Tunland front hub
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to FOTON service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
