TMB301/13 Wheel Bearing For Adly
The DUHUI Bearing TMB301/13 is a single-row deep groove ball bearing with a 13 mm bore, 37 mm outer diameter, and 12 mm width. This automotive hub bearing is used in Adly scooter and ATV applications, as well as Honda motorcycle applications where the OE reference 91006-KK0-771 is specified. It matches OE specification TMB301/13 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for light-duty automotive and powersports applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3497 |
| Part Number | TMB301/13 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 13.00 mm (0.512 inch) |
| Outer Diameter (D) | 37.00 mm (1.457 inch) |
| Width (B) | 12.00 mm (0.472 inch) |
| Weight | 0.06 kg (0.13 lb) |
| Bearing Material | Chrome Steel (GCr15) |
| Cage Material | Steel Cage |
| Precision Rating | ABEC1, P0 |
| Temperature Range | -30°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from 123Bearing, Bearing-Website, and CuscinettiTop catalogs. This is a hub bearing designed for scooter/ATV and motorcycle applications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3497
OE Numbers:
HONDA: 91006-KK0-771, 91006KK0771
Reference Numbers (Interchange):
NTN: TMB301-13-M3, TMB301/13 M3, TMB301/13
TMB301, TMB301-13-M3
6301/13
Vehicle Fitment
ADLY: Thunder Bird 125, Thunder Bird 50, Silver Fox 50, Super Sonic 50, ATV 50, Fox 50, BT 50, Panther 50, Panther 100, Jet 100, Cat 50, Cat 125, Silverfox 100
HONDA: Various motorcycle applications (with OE 91006-KK0-771)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- Manufactured to OE specifications with chrome steel (GCr15) rings and balls for durability and fatigue resistance.
- Precision-rated to ABEC1 / P0 tolerance standards for reliable performance.
- Factory-lubricated and ready to install – pre-greased with high-quality lubricant.
- Direct interchange with multiple major brand equivalents including NTN TMB301-13-M3 and OE Honda 91006-KK0-771.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (13.00 mm) and outer diameter (37.00 mm) match your hub and axle before installation.
- This is an open type bearing (no seals) – install with appropriate grease packing and ensure proper sealing in the hub assembly.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the hub – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Pack with high-quality wheel bearing grease before installation if not pre-lubricated.
- Torque all fasteners to the vehicle manufacturer’s service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
