Tensioner EP030 For Honda
The DUHUI Bearing EP030 drive belt tensioner is an OE-replacement component for Honda S2000 AP1 models equipped with the 2.0L F20C engine. This tensioner maintains proper serpentine belt tension across the accessory drive system, preventing belt slip and reducing wear on engine components. Manufactured to match original equipment specifications including EP030, EF6T217A, 92502550, and 9157962, this tensioner delivers reliable performance for compatible Honda vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | EP030 |
| Product Type | Belt Tensioner |
| Outer Diameter | 75.00 mm (2.953 inch) |
| Inner Diameter | 17.00 mm (0.669 inch) |
| Width | 30.00 mm (1.181 inch) |
| Belt Type | Serpentine |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
EP030, EPUTU, EF6T217A, 92502550, 9157962, 213Z6B209AA
Reference Numbers (Interchange):
Dayco: EP030
38009
STELL: EP030
Vehicle Fitment
HONDA S2000 (AP1): 2.0 (F20C) 1999-2003
Additional compatible models (verify before ordering):
HONDA: Civic 2006-2011, CR-V 2007-2011, Accord 2008-2012
ACURA: CSX 2006-2011
FORD: Escape 2008-2012, Focus 2005-2011
MAZDA: Mazda3 2010-2013, Mazda5 2010-2013, Mazda6 2009-2012, CX-7 2010-2012
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-replacement belt tensioner for Honda S2000 AP1 2.0L F20C applications. Matches OEM specifications including EP030, EF6T217A, and 92502550.
- 75 mm outside diameter and 17 mm inner diameter provide exact fitment for the accessory drive system.
- 30 mm width ensures proper belt contact and tension distribution.
- Spring-loaded automatic tensioning mechanism maintains optimal belt tension as the belt stretches over time.
- Durable construction ensures consistent belt tension across the engine operating range.
Installation Notes
- Verify the 75 mm outside diameter, 17 mm inner diameter, and 30 mm width match your original tensioner before installation.
- Inspect the serpentine belt for wear or glazing before installing the new tensioner.
- Torque the tensioner mounting bolt to 16 ft-lbs and the pulley bolt to 31 ft-lbs.
- After installation, verify proper belt tension and check for smooth pulley rotation.
- This tensioner is compatible with the Honda F20C engine – confirm belt routing matches your vehicle’s specific configuration.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tensioners and automotive bearings to OE specifications. Contact us
