Tensioner Tension Pulley 960010B4013900 For Baic
The DUHUI Bearing 960010B4013900 tensioner pulley is an OE-spec replacement component for the accessory drive belt system on select BAIC models. This tensioner pulley maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 960010-B40139-00, this unit delivers reliable performance for BAIC passenger car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1104 |
| Part Number | 960010B4013900 |
| Product Type | Belt Tensioner / Drive Belt Tensioner Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1104
OE Numbers: 960010-B40139-00, 960010B4013900
Reference Numbers (Interchange):
GATES: T39520
AISIN: TBT-013
TNF: LZ-7981
Vehicle Fitment
This tensioner pulley is designed for BAIC vehicles equipped with the A151 1.5L naturally aspirated engine, including but not limited to:
BAIC SENOVA D50: 1.5L (A151 engine) 2014-present
BAIC SENOVA X25: 1.5L 2015-present
BAIC SENOVA X35: 1.5L 2016-present
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BAIC Senova D50, X25, and X35 1.5L A151 engine applications.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with GATES T39520 and AISIN TBT-013 for easy interchangeability in the aftermarket.
- Durable construction engineered for the specific tensioning requirements of BAIC compact sedan and SUV models.
- OE-compatible replacement for original part numbers 960010-B40139-00 and 960010B4013900.
Installation Notes
- This tensioner is designed for the accessory drive belt system on BAIC models equipped with the A151 1.5L engine.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use appropriate tools to relieve tension from the belt – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tensioner pulleys and wheel bearing assemblies to OE specifications. Contact us
