Tensioner Tension Pulley 32145276 For Seat Volkswagen
The DUHUI Bearing 32145276 drive belt idler pulley is an OE-spec replacement component for the accessory drive belt system on a wide range of Volkswagen Group models equipped with 1.8T and 1.9 TDI engines. This idler pulley ensures proper serpentine belt routing and maintains correct belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 32145276 and 06A145276A, this unit is compatible with the VW Group EA827 and related engine families .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 32145276 |
| Outer Diameter | 76.00 mm (2.992 inch) |
| Height | 26.00 mm (1.024 inch) |
| Product Type | Idler Pulley / Deflection Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 32145276, 06A145276A, 06A145276B
Reference Numbers (Interchange):
INA: 532032630, VKM31039
GATES: T38194
SNR: GA357.06
SKF: VKM31002
FEBI BILSTEIN: 39210
SWAG: 30939210
RUVILLE: 55734
OPTIBELT: 140 UR
CONTINENTAL: V85543
BREDA LORETT: CR3684
Vehicle Fitment
This idler pulley is compatible with a wide range of Volkswagen Group models equipped with 1.8T 20V and 1.9 TDI engines, including:
SEAT LEON (1M1): 1.8 T 1999-2006, 1.8 T Cupra 1999-2006
SEAT TOLEDO (1M2): 1.8 T 1999-2004
VOLKSWAGEN BORA (1J2): 1.8 T 1998-2005
VOLKSWAGEN GOLF IV (1J1): 1.8 T 1997-2003, 1.9 TDI 1997-2003
VOLKSWAGEN PASSAT (3B): 1.8 T 1996-2005, 1.9 TDI 1996-2005
AUDI: A3 (8L) 1.8T 1998-2003, TT (8N) 1.8T 1998-2006
ŠKODA: Octavia I 1.8T 1998-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 32145276 / 06A145276A.
- Precision-engineered idler pulley for accessory drive belt systems on 1.8T and 1.9 TDI engines.
- Cross-references with multiple leading brands including INA 532032630, GATES T38194, and SKF VKM31002 for easy interchangeability in the aftermarket.
- Premium sealed bearing protects from contaminants and ensures long service life.
- Smooth contact surface designed specifically for V-ribbed serpentine belt applications.
Installation Notes
- This pulley is designed for the accessory drive belt system on VW Group models equipped with 1.8T and 1.9 TDI engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve tension – never cut or pry the belt off while under tension.
- When replacing the pulley, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces idler pulleys, tensioner pulleys, and wheel bearing assemblies to OE specifications. Contact us
