Tensioner Tension Pulley 14450P8AA01 For HONDA
The DUHUI Bearing 14450P8AA01 timing belt tensioner pulley is an OE-spec replacement component for the timing belt system on select Honda models. This tensioner pulley maintains proper timing belt tension, ensuring accurate valve and piston synchronization and preventing catastrophic engine damage if belt failure occurs. Manufactured to match original equipment specifications including 14450P8AA01 and 14550PGEA01, this unit is a critical component for timing belt replacement service on Honda 4-cylinder engines.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 14450P8AA01 |
| Product Type | Timing Belt Tensioner Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 14450P8AA01, 14550PGEA01, PU285524A
Reference Numbers (Interchange):
Honda: 14450-P8A-A01
Honda: 14550-PGE-A01
Bando: PU285524A
Vehicle Fitment
This timing belt tensioner pulley is compatible with select Honda models equipped with 4-cylinder engines, including:
HONDA: 2000-2004 models with compatible timing belt systems
HONDA ACCORD: 2.3L/3.0L 1998-2002
HONDA CIVIC: 1.6L/1.7L 1996-2005
HONDA CR-V: 2.0L 1997-2001
HONDA PRELUDE: 2.2L 1997-2001
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Honda applications with 14450P8AA01 / 14550PGEA01.
- Precision-engineered tensioner pulley for Honda 4-cylinder timing belt systems, maintaining proper belt tension to ensure accurate valve and piston synchronization.
- Cross-references with multiple Honda OE numbers for easy interchangeability in the aftermarket.
- Premium sealed bearing protects from contaminants and ensures long service life.
- OE-compatible replacement for original part numbers 14450P8AA01, 14550PGEA01, and PU285524A.
Installation Notes
- This tensioner pulley is designed for the timing belt system on Honda models equipped with 4-cylinder engines.
- When replacing the tensioner pulley, it is highly recommended to replace the timing belt and water pump as well – these are interference engines and timing belt failure can cause serious damage to valves and pistons.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt tensioners, idler pulleys, and wheel bearing assemblies to OE specifications. Contact us
