Tensioner Tension Pulley 06H903341D For Audi Seat
The DUHUI Bearing 06H903341D drive belt tensioner is an OE-spec replacement component for the accessory drive belt system on a wide range of Audi and SEAT models equipped with 2.0 TFSI and 3.2 FSI engines. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 06H903341D and 06H903341C, this unit delivers reliable performance for European passenger car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 06H903341D |
| Outer Diameter | 90.00 mm (3.543 inch) |
| Height | 25.00 mm (0.984 inch) |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 06H903341D, 06H903341C
Reference Numbers (Interchange):
AUTEX: 702089
BREDA LORETT: CR 4576
CONTINENTAL: V-3579
DAYCO: 89087
GATES: 38096, 38176, T38557
INA: 531 0571 10, VKM21403
METELLI: 22-0109
OPTIBELT: 120 SR
RUVILLE: 54201
TRQ: BPA04018
Vehicle Fitment
This drive belt tensioner is designed for Audi and SEAT models equipped with 2.0 TFSI (engine codes CAEA, CAEB, CDNB, CFKA, CCMA, CPMA) and 3.2 FSI engines:
AUDI A4 (8K2): 2.0 TFSI 2007-2015, 3.2 FSI 2007-2011
AUDI A5 (8T): 2.0 TFSI 2007-2016, 3.2 FSI 2007-2011
AUDI Q5 (8R): 2.0 TFSI 2008-2017
AUDI A6 (C6): 2.0 TFSI 2008-2011
SEAT EXEO (3R2): 2.0 TFSI 2008-present
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Audi and SEAT applications with 06H903341D / 06H903341C.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including GATES 38096 and INA 531 0571 10 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers 06H903341D and 06H903341C.
Installation Notes
- This tensioner is designed for the accessory drive belt system on Audi and SEAT models equipped with 2.0 TFSI and 3.2 FSI engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces drive belt tensioners and wheel bearing assemblies to OE specifications. Contact us
