Tensioner Tension Pulley 06E903341A For Audi
The DUHUI Bearing 06E903341A drive belt tensioner is an OE-spec replacement component for the accessory drive belt system on select Audi models equipped with 3.2L V6 engines. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 06E903341A and 06E903341G, this unit delivers reliable performance for premium Audi sedan applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 06E903341A |
| Outer Diameter | 75.00 mm (2.953 inch) |
| Height | 26.00 mm (1.024 inch) |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 06E903341A, 06E903341G
Reference Numbers (Interchange):
CONTINENTAL: V-3569
GATES: 38181, 2301-23693
DAYCO: 89649
INA: 531 0571 10
RUVILLE: 55112
TRQ: BPA04182
Vehicle Fitment
This drive belt tensioner is designed for Audi models equipped with the 3.2L V6 FSI engine (engine codes BKH, BUB, BMX, AUK):
AUDI A4 (8EC, B7): 3.2 FSI 2004-2008
AUDI A4 (8E5, B7): 3.2 FSI 2004-2008
AUDI A6 (4F): 3.2 FSI 2005-2011
AUDI Q7 (4L): 3.2 FSI 2005-2006
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Audi applications with 06E903341A / 06E903341G.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including GATES 38181 and CONTINENTAL V-3569 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers 06E903341A and 06E903341G.
Installation Notes
- This tensioner is designed for the accessory drive belt system on Audi models equipped with the 3.2L V6 FSI engine.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces drive belt tensioners and wheel bearing assemblies to OE specifications. Contact us
