Tensioner 068109243F For Audi Seat
The DUHUI Bearing 068109243F timing belt tensioner is a direct OE-replacement hydraulic tensioner for the timing belt system on a wide range of Audi and SEAT models equipped with 2.0L, 2.3L, and 2.6L petrol engines. This hydraulic tensioner uses engine oil pressure to automatically adjust and maintain optimal belt tension throughout the timing belt’s service life, ensuring accurate valve and piston synchronization on interference engines. Manufactured to match original equipment specifications including 068109243F, 068109243, 068109243C, and 068109243B, this unit is a critical component for timing belt replacement service on the VW Group EA827 engine family.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 068109243F |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 30.00 mm (1.181 inch) |
| Tensioner Type | Hydraulic Cylinder |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 068109243F, 068109243, 068109243C, 068109243B
Reference Numbers (Interchange):
INA: VKM11010
GATES: T42051
SKF: VKM21006
FEBI BILSTEIN: 20965
BREDA LORETT: CR3515
Vehicle Fitment
This timing belt tensioner is designed for VW Group models equipped with 2.0L, 2.3L, and 2.6L petrol engines (engine codes 6A, ABC, AAH, ABK, ACE):
AUDI 80 (8C, B4): 2.0 1991-1995, 2.3 1991-1995, 2.6 1991-1995
AUDI 100 (4A, C4): 2.0 1990-1994, 2.3 1990-1994, 2.6 1990-1994
AUDI COUPE (8B): 2.0 1991-1995, 2.3 1991-1995
SEAT IBIZA II: 2.0 1993-2002
SEAT CORDOBA: 2.0 1993-2002
VOLKSWAGEN PASSAT (B4): 2.0 1993-1996
VOLKSWAGEN GOLF III: 2.0 1993-1997
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 068109243F / 068109243B.
- Hydraulic tensioner design uses engine oil pressure to deliver precise, automatic tension control as the timing belt stretches over time.
- Cross-references with multiple leading brands including INA VKM11010 and GATES T42051 for easy interchangeability in the aftermarket.
- Premium metal construction withstands rigorous engine conditions.
- OE-compatible replacement for original part numbers 068109243F, 068109243, 068109243C, and 068109243B.
Installation Notes
- This tensioner is designed for the timing belt system on VW Group models equipped with 2.0L, 2.3L, and 2.6L petrol engines.
- When replacing the tensioner, it is highly recommended to replace the timing belt, idler pulleys, and water pump as well – these are interference engines and timing belt failure can cause serious damage to valves and pistons.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt tensioners, idler pulleys, and wheel bearing assemblies to OE specifications. Contact us
