Tensioner 036109243K For Audi
The DUHUI Bearing 036109243K timing belt tensioner is a direct OE-replacement hydraulic tensioner for the timing belt system on a wide range of Audi, Volkswagen, SEAT, and Škoda vehicles equipped with 1.6 FSI petrol engines. This hydraulic tensioner uses engine oil pressure to automatically adjust and maintain optimal belt tension, ensuring accurate valve and piston synchronization on interference engines. Manufactured to match original equipment specifications including 036109243K, 036109243S, and 036109243AC, this unit is a critical component for timing belt replacement service.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 036109243K |
| Outer Diameter | 60.00 mm (2.362 inch) |
| Width | 18.70 mm (0.736 inch) |
| Tensioner Type | Hydraulic Cylinder |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 036109243K, 036109243S, 036109243AC, 036109243AE, 036109243AG
Reference Numbers (Interchange):
INA: LZ7109
GATES: T42051
SKF: VKM21006
FEBI BILSTEIN: 20965
Vehicle Fitment
AUDI A2 (8Z0): 1.6 FSI 2002-2005
AUDI A3 (8P1): 1.6 FSI 2003-2008
VOLKSWAGEN: Golf V 1.6 FSI 2003-2008
SEAT: Altea 1.6 FSI 2004-2008, Leon 1.6 FSI 2005-2008
ŠKODA: Octavia 1.6 FSI 2004-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 036109243K / 036109243S.
- Hydraulic tensioner design uses engine oil pressure to deliver precise, automatic tension control as the timing belt stretches over time.
- Cross-references with multiple leading brands including INA LZ7109 and GATES T42051 for easy interchangeability in the aftermarket.
- Premium metal construction withstands rigorous engine conditions.
- OE-compatible replacement for original part numbers 036109243K, 036109243S, 036109243AC, 036109243AE, and 036109243AG.
Installation Notes
- This tensioner is designed for the timing belt system on VW Group models equipped with 1.6 FSI petrol engines.
- When replacing the tensioner, it is highly recommended to replace the timing belt, idler pulleys, and water pump as well – these are interference engines and timing belt failure can cause serious damage to valves and pistons.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt tensioners, idler pulleys, and wheel bearing assemblies to OE specifications. Contact us
