T2ED050 Wheel Bearing For IVECO
The DUHUI Bearing T2ED050 wheel bearing is a metric-series single-row tapered roller bearing with a 50 mm bore, 100 mm outer diameter, and 36 mm total width. Designed for commercial vehicle applications, this bearing supports combined radial and axial loads in transmissions, differentials, and wheel hub positions. It matches Iveco OE specification 7169934 and Scania OE 1903570, with cross-references to SKF VKHB2255, FAG T2ED050, and Koyo T2ED050.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2375 |
| Part Number | T2ED050 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 50.00 mm (1.969 inch) |
| Outer Diameter (D) | 100.00 mm (3.937 inch) |
| Total Width (T) | 36.00 mm (1.417 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on SKF and FAG published specifications for the T2ED050 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2375
OE Numbers:
7169934, 1903570, 374330, 0750117993
Reference Numbers (Interchange):
SKF: T2ED050, VKHB2255
FAG: T2ED050, 201026
Koyo: T2ED050
TRIPLE FIVE: JF5049JF5010
Vehicle Fitment
IVECO ZETA: 95-14 1985-1991
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for commercial vehicle transmission, differential, and wheel hub applications.
- Metric-series configuration with 50 mm bore and 100 mm outer diameter matches SKF VKHB2255, FAG T2ED050, and Koyo T2ED050 equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance in demanding commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with Iveco OE 7169934 and Scania OE 1903570 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (50.00 mm) and outer diameter (100.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Iveco or Scania service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
