T213301210 Wheel Hub Bearing For CHERY
The DUHUI T213301210 wheel hub bearing is a direct-fit rear axle replacement designed for CHERY Tiggo 5 2WD models from 2013 to 2017. This rear wheel hub bearing meets OE specification T213301210, delivering reliable performance in the aftermarket. It features a 5-bolt flange with precision dimensions for secure fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1208 |
| Part Number | T213301210 |
| Position | Rear Axle |
| Drive Type | 2WD |
| Outer Diameter | 152.00 mm (5.984 inch) |
| Inner Diameter | 83.80 mm (3.299 inch) |
| Height | 114.00 mm (4.488 inch) |
| Bolt Holes | 5 |
Note: This rear wheel hub bearing features a 5-bolt flange and is designed for CHERY Tiggo 5 2WD applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1208
OE Numbers: T213301210
Reference Numbers (Interchange):
CHERY: T213301210
Vehicle Fitment
CHERY: Tiggo 5 (2WD, 2013-2017)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for CHERY Tiggo 5 2WD models
- 5-bolt flange design provides enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number T213301210 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number T213301210 on your original bearing before installation
- Confirm rear axle 2WD fitment for your specific CHERY Tiggo 5 model (2013-2017)
- Confirm the 5-bolt flange matches your CHERY Tiggo 5 rear hub
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to CHERY service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
