S18D3301210 Wheel Hub Bearing For CHERY
The DUHUI S18D3301210 is a complete wheel hub bearing assembly designed for Chery Tiggo 5X models from 2017 onward. This 4-stud hub assembly features an inner diameter of 42 mm, 48 ABS sensor ring teeth, and M10.5 thread size, matching OE specification S18D3301210. It is directly interchangeable with OEM parts for reliable performance.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01211 |
| Part Number | S18D3301210 |
| Inside Diameter | 42.00 mm (1.654 inch) |
| Rim / Wheel Stud Quantity | 4-Hole |
| ABS Ring Number of Teeth | 48 |
| Thread Size | M10.5 |
Note: Dimensional data is based on available sources. This is a wheel hub bearing assembly designed for Chery Tiggo 5X applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01211
OE Numbers: S18D3301210
Reference Numbers (Interchange):
CHERY: S18D3301210
Vehicle Fitment
CHERY: TIGGO 5X 1.5 T – 2017 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel hub bearing assembly designed for Chery Tiggo 5X applications
- 4-stud design with 42 mm inner diameter and M10.5 thread size for precise fitment
- Integrated 48-tooth ABS sensor ring for plug-and-play compatibility
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Direct interchange with OE number S18D3301210
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions (inner diameter 42 mm, 4-bolt configuration) against your original part before installation
- Confirm fitment for your specific Chery Tiggo 5X model (2017 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the axle nut and mounting bolts to Chery service manual specifications
- After installation, verify the ABS sensor ring is properly aligned and the warning light clears
- Verify smooth wheel rotation without noise or binding
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
