Ordinary Release Bearing VKC3688
The DUHUI VKC3688 ordinary release bearing is a direct replacement engineered for TOYOTA applications. This release bearing matches OE specifications including 31230-52010 and cross-references with SKF VKC3688, LUK 500038260, and SACHS 3151994901.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3688 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 31230-52010, 31230-52011
Reference Numbers (Interchange):
SKF: VKC3688
Timken: 50TKZ3301DR
LUK: 500038260
SACHS: 3151994901
Vehicle Fitment
TOYOTA: COROLLA (_E11_) 1.3 I4 (EE110) 1997-2001, PLATZ (NCP1_, SCP1_) 1.0 (SCP11_, SCP11) 1999-2005, VIOS / SOLUNA VIOS (_P4_) 1.3 VVTi (AXP41_) 2002-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match TOYOTA clutch system specifications.
- OE-match design for COROLLA, PLATZ, and VIOS applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3688, LUK 500038260, and SACHS 3151994901.
- Interchange number: 50TKZ3301DR.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to TOYOTA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
