Ordinary Release Bearing VKC3684
The DUHUI VKC3684 ordinary release bearing is a direct replacement engineered for SUZUKI applications. This release bearing matches OE specification 23265-81A20 and cross-references with SKF VKC3684, LUK 500101160, and SACHS 3151996501.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3684 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 23265-81A20
Reference Numbers (Interchange):
SKF: VKC3684
Timken: FCR48-39-6/2E
LUK: 500101160
SACHS: 3151996501
Vehicle Fitment
SUZUKI: CARRY Bus 1.3 1999-2006, CARRY Van (FD) 1.3 16 V (DA32V) 2000-, JIMNY Closed Off-Road Vehicle (SN) 1.3 (SN413) 2004-
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match SUZUKI clutch system specifications.
- OE-match design for CARRY and JIMNY applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3684, LUK 500101160, and SACHS 3151996501.
- Interchange number: FCR48-39-6/2E.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to SUZUKI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
