Ordinary Release Bearing VKC3672
The DUHUI VKC3672 clutch release bearing is a direct-fit replacement engineered for Toyota SUV, pickup, and commercial vehicle applications. This clutch release bearing meets multiple OE specifications including 31230-60160 and 31230-60170, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3672 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 31230-60160, 31230-60170, 31230-36149, 31230-36140
Reference Numbers (Interchange):
SKF: VKC3672
Timken: 58TKB3503AR
NTN: 58SCRN37-P
Vehicle Fitment
TOYOTA: 4Runner III (_N18_) 3.0 TDi (KZN185) (2000-2002), Fortuner (_N5_, _N6_) 2.5 D-4D (KUN60) (2004-2015), Hiace IV Bus (__H1_, __H2_) 2.5 D-4D (KLH12, KLH22) (2006-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Toyota 4Runner, Fortuner, and Hiace clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Toyota specifications – installs with no modifications.
- Interchangeable with LUK 500077560 and Sachs 3151997801 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Toyota factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
