Ordinary Release Bearing VKC3613
The DUHUI VKC3613 ordinary release bearing is a direct replacement engineered for NISSAN and SUBARU applications. This release bearing matches OE specifications including 30502-AA051 and cross-references with SKF VKC3613, LUK 500060660, and SACHS 3151861002.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3613 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-AA051, 30502-AA060
Reference Numbers (Interchange):
SKF: VKC3613
Timken: FCR62-42-4/2E, 614159, BRG833
LUK: 500060660
SACHS: 3151861002
Vehicle Fitment
NISSAN: Various models
SUBARU: FORESTER (SF_) 2.0 AWD 1998-2002, IMPREZA Estate (GF) 1.6 (GF3) 1993-1998, IMPREZA Hatchback (GP_) 1.6 i (GP2) 2012-2016
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN and SUBARU clutch system specifications.
- OE-match design with multiple OE number interchange: 30502-AA051 and 30502-AA060.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3613, LUK 500060660, SACHS 3151861002.
- Multiple interchange numbers: FCR62-42-4/2E, 614159, and BRG833.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN or SUBARU factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
