Ordinary Release Bearing VKC3611
The DUHUI VKC3611 ordinary release bearing is a direct replacement engineered for NISSAN applications. This release bearing matches OE specifications including 30502-D3560 and cross-references with SKF VKC3611, LUK 500047360, and SACHS 3151865001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3611 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-D3560, 30502-D3518, 30502-D3522
Reference Numbers (Interchange):
SKF: VKC3611
Timken: FCR48-24/2E, FCR48-24-3/2E, RB9818
LUK: 500047360
SACHS: 3151865001
Vehicle Fitment
NISSAN: BLUEBIRD (T72, T12, U12) 1.8 i 16V (RLT72) 1989-1990, BLUEBIRD Hatchback (T72, T12) 1.8 i 16V (FRLT72) 1989-1990, PRAIRIE PRO (M11) 2.0 i 1988-1992
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN clutch system specifications.
- OE-match design for BLUEBIRD and PRAIRIE PRO applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3611, LUK 500047360, and SACHS 3151865001.
- Multiple interchange numbers including FCR48-24/2E, FCR48-24-3/2E, and RB9818.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
