Ordinary Release Bearing VKC3610
The DUHUI VKC3610 ordinary release bearing is a direct replacement engineered for NISSAN passenger and pick-up applications. This release bearing matches OE specifications including 30502-03E24 and cross-references with SKF VKC3610, LUK 500048760, and SACHS 3151863001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3610 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-03E24, 30502-28E24, 30502-28E14, 30502-31U00, 30502-31U24, 30502-0W724
Reference Numbers (Interchange):
SKF: VKC3610
Timken: FCR62-29-5/2E, FCR62-29-6/2E, FCR62-29-7/2E, FCR62-29-11, FCR62-29/2E, RB9805, 614157
LUK: 500048760
SACHS: 3151863001
Vehicle Fitment
NISSAN: MAXIMA / MAXIMA QX IV (A32) 2.0 1995-2000, NAVARA (D22) 2.5 TDiC 4×4 1998-2001, PICK UP (D21) 2.5 D 4WD 1986-1991
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN clutch system specifications.
- OE-match design for MAXIMA, NAVARA, and PICK UP applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3610, LUK 500048760, SACHS 3151863001.
- Multiple interchange numbers: FCR62 series, RB9805, and 614157.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
