Ordinary Release Bearing VKC3607
The DUHUI VKC3607 ordinary release bearing is a direct replacement engineered for MAZDA 323 applications. This release bearing matches OE specification E301-16-510A and cross-references with SKF VKC3607, LUK 500052060, and SACHS 3151882001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3607 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: E301-16-510A
Reference Numbers (Interchange):
SKF: VKC3607
Timken: RCT331SA1, TKS50-17K, FCR50-17-8/2E, RB9588A, RB9961
LUK: 500052060
SACHS: 3151882001
Vehicle Fitment
MAZDA: 323 II Hatchback (BD) 1.6 (BD106) 1986-1987, 323 III Saloon (BF) 1.1 1985-1990, 323 III Station Wagon (BW) 1.3 (BW103) 1986-1990
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match MAZDA 323 clutch system specifications.
- OE-match design for MAZDA 323 II and III models.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3607, LUK 500052060, SACHS 3151882001.
- Multiple interchange numbers: RCT331SA1, TKS50-17K, FCR50-17-8/2E, RB9588A, RB9961.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MAZDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
