Ordinary Release Bearing VKC3584
The DUHUI VKC3584 clutch release bearing is a direct-fit replacement engineered for Toyota passenger car and MPV applications. This clutch release bearing meets multiple OE specifications including 31230-20160 and 31230-20170, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3584 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 31230-20160, 31230-20170, 31230-20190, 31230-33020
Reference Numbers (Interchange):
SKF: VKC3584
Timken: RCTS355SA8
NTN: 60TKB3502R
Vehicle Fitment
TOYOTA: Avensis Verso (_M2_) 2.0 VVT-i (ACM20R) (2001-2009), Camry (_V1_) 2.0 4WD (SV43) (1993-1997), Celica Coupe (_T16_) 2.0 Turbo 4WD (ST165) (1988-1989)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Toyota Avensis, Camry, and Celica clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Toyota specifications – installs with no modifications.
- Interchangeable with LUK 500071560, 500069560, and Sachs 3151600509 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Toyota factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
