Ordinary Release Bearing VKC3581
The DUHUI VKC3581 ordinary release bearing is a direct replacement engineered for NISSAN applications. This release bearing matches OE specifications including 30502-28E20 and cross-references with SKF VKC3581, LUK 500048660, and SACHS 3151854001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3581 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-28E20, 30502-96E20, 30502-28E21, 30502-03E20, 30502-31U20, 30502-0W720
Reference Numbers (Interchange):
SKF: VKC3581
Timken: TKS62-5/32K, FCR62-32-10/2E, FCR62-32-11/2E, FCR62-32-1/2E, FCR62-32/2E, FCR62-32-12/2E
LUK: 500048660
SACHS: 3151854001
Vehicle Fitment
NISSAN: ALMERA II (N16) 2.2 dCi 2003-2006, ALMERA II Hatchback (N16) 2.2 dCi 2003-2006, PICK UP (D21) 2.5 D 1987-1998
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN clutch system specifications.
- OE-match design for ALMERA II and PICK UP applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3581, LUK 500048660, SACHS 3151854001.
- Multiple interchange numbers including TKS62-5/32K and FCR62-32 series.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
