Ordinary Release Bearing VKC3577
The DUHUI VKC3577 clutch release bearing is a direct-fit replacement engineered for Honda Accord applications. This clutch release bearing meets multiple OE specifications including 22810-P21-003 and 22810-PG2-000, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3577 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-P21-003, 22810-PG2-000, 22810-PG2-004, 22810-PG2-008, 22810-PX5-J02
Reference Numbers (Interchange):
SKF: VKC3577
Timken: CBU553524B
NTN: 55SCRN41P
Vehicle Fitment
HONDA: Accord IV (CB) 1.8 (1990-1991), Accord IV Aerodeck (CB) 2.0 i 16V (CC9) (1993), Accord V (CE, CF, CD) 2.2 EX/EXRL (CE9) (1996-1998)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Honda Accord clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Honda specifications – installs with no modifications.
- Interchangeable with LUK 500049260 and Sachs 3151886001 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Honda factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
