Ordinary Release Bearing VKC3555
The DUHUI VKC3555 ordinary release bearing is a direct replacement engineered for NISSAN applications. This release bearing matches OE specifications including 30502-52A00 and cross-references with SKF VKC3555, LUK 500068260, and SACHS 3151857001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3555 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-52A00, 30502-52A60, 30502-53J00, 30502-53J01, 30502-53J05, 30502-53J61, 30202-53J00, 30502-53JR5
Reference Numbers (Interchange):
SKF: VKC3555
Timken: RCTS33SA3, 48TKA3301, TKS48-23K, 48TKB3302A, 48TKB3301, FCR48-23-4/2E, FCR48-12/2E
LUK: 500068260
SACHS: 3151857001
Vehicle Fitment
NISSAN: 100NX (B13) 1.6 1990-1994, ALMERA I (N15) 1.6 1995-2000, BLUEBIRD (T72, T12, U12) 1.6 1986-1990
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN clutch system specifications.
- OE-match design for 100NX, ALMERA I, and BLUEBIRD applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3555, LUK 500068260, and SACHS 3151857001.
- Multiple interchange numbers including RCTS33SA3, 48TKA3301, and FCR48 series.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
