Ordinary Release Bearing VKC3542
The DUHUI VKC3542 ordinary release bearing is a direct replacement engineered for HONDA CIVIC, INTEGRA and ROVER 200 applications. This release bearing matches OE specifications including 22810-PE6-003 and cross-references with SKF VKC3542, LUK 500030760, and SACHS 3151820001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3542 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-PE6-003, 22810-PE6-921, 22810-PL6-003, GRB90244
Reference Numbers (Interchange):
SKF: VKC3542
Timken: RCT29SA, 47SCRN031-2, 614033, RB9962, RB9882, BRG352, CB2124C
LUK: 500030760
SACHS: 3151820001
Vehicle Fitment
HONDA: CIVIC III Hatchback (AL, AJ, AG, AH) 1.2 (AL) 1984-1987, CIVIC III Saloon (AM, AK, AU) 1.2 (AM) 1985-1987, INTEGRA Hatchback (DA) 1.5 (DA4) 1985-1989
ROVER: 200 I Saloon (XH) 213 S 1985-1989, 200 II Hatchback (XW) 214 Si/Gsi 1989-1995
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HONDA CIVIC III, INTEGRA, and ROVER 200 applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3542, LUK 500030760, and SACHS 3151820001.
- Multiple OE number interchange including 22810-PE6-003 and 22810-PE6-921.
- Multiple interchange numbers including RCT29SA, 47SCRN031-2, 614033, RB9962, RB9882, BRG352, and CB2124C.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HONDA or ROVER factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
