Ordinary Release Bearing VKC3515
The DUHUI VKC3515 ordinary release bearing is a direct replacement engineered for MITSUBISHI and HYUNDAI applications. This release bearing matches OE specifications including MD706180 and cross-references with SKF VKC3515, LUK 500023760, and SACHS 3151808001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3515 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: MD706180, MD719925, MD722744, MD702241, 41421-21000, 41421-21300, 41410-11000, 41421-21400
Reference Numbers (Interchange):
SKF: VKC3515
Timken: RCT322SA, 48TKA3201U3, 48TKB3202, TKS48-01K, 48SCRN32K, 614126, RB9836, RB9953
LUK: 500023760
SACHS: 3151808001
Vehicle Fitment
MITSUBISHI: GALANT VIII (EA_) 2.0 (EA2A) 1996-2000, OUTLANDER I (CU_W) 2.0 (CU2W) 2003-2006, SPACE RUNNER (N6_W) 2.0 (N63W) 1999-2002
HYUNDAI: LANTRA I (J-1) 1.5 i.e. 1990-1995, S COUPE (SLC) 1.5 i 1990-1996
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match MITSUBISHI and HYUNDAI clutch system specifications.
- OE-match design for GALANT, OUTLANDER, SPACE RUNNER, LANTRA, and S COUPE applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3515, LUK 500023760, and SACHS 3151808001.
- Multiple interchange numbers including RCT322SA, 48TKA3201U3, and TKS48-01K.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MITSUBISHI or HYUNDAI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
