Ordinary Release Bearing VKC3509
The DUHUI VKC3509 clutch release bearing is a direct-fit replacement engineered for a wide range of applications including Nissan, Toyota, Mitsubishi, and Suzuki. This clutch release bearing meets multiple OE specifications including 30502-KA000 and 83151-4700, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3509 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-KA000, 30502-KA001, 83151-4700, 31230-87202, 90043-63002, MT209224
Reference Numbers (Interchange):
SKF: VKC3509
Timken: RCT35-1
NTN: 35TMK29B2U3
Vehicle Fitment
SUZUKI: Alto I (0S) 0.8 (SS80) (1982-1984), Alto II Hatchback 0.8 (SB308/CA) (1986-1988)
NISSAN, TOYOTA, MITSUBISHI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches multiple manufacturer clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500030260 and Sachs 1863841001 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
