Ordinary Release Bearing VKC3508
The DUHUI VKC3508 ordinary release bearing is a direct replacement engineered for HONDA ACCORD applications. This release bearing matches OE specifications including 22810-PB6-921 and cross-references with SKF VKC3508, LUK 500030860, and SACHS 3151817001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3508 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-PB6-921, 22810-PB6-922, 22810-PB6-923, 22810-PC8-921, 22810-PC8-922, 22810-PC8-923
Reference Numbers (Interchange):
SKF: VKC3508
Timken: RCTS31SA, RCT31SA, 55TKA3102, 55TMK3102, 55TKA3101, X10-FCR55-5/2E, 6140
LUK: 500030860
SACHS: 3151817001
Vehicle Fitment
HONDA: ACCORD I (SJ, SY) 1.6 L/EX (SY) 1978-1983, ACCORD II Hatchback (AC, AD) 1.6 EX (AC) 1983-1985, ACCORD III Aerodeck (CA) 1.6 L (CA4) 1985-1989
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HONDA ACCORD I, II, and III models.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3508, LUK 500030860, and SACHS 3151817001.
- Multiple OE number interchange: 22810-PB6-921, 22810-PB6-922, 22810-PB6-923, 22810-PC8-921, 22810-PC8-922, 22810-PC8-923.
- Multiple interchange numbers including RCTS31SA, 55TKA3102, and X10-FCR55-5/2E.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HONDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
