Ordinary Release Bearing VKC3503
The DUHUI VKC3503 ordinary release bearing is a direct replacement engineered for TOYOTA and HONDA applications. This release bearing matches OE specifications including 90363-33057 and cross-references with SKF VKC3503, LUK 500022660, and SACHS 1863803001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3503 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90363-33057, 90363-33077, 90363-33001, 22863-634-003, 22863-634-004, 22863-634-023
Reference Numbers (Interchange):
SKF: VKC3503
Timken: RCT3360A, RCT3360SL1, RCT3360S, TK33-1K, TK33-1U3, SF0724/2E
LUK: 500022660
SACHS: 1863803001
Vehicle Fitment
TOYOTA: Various models
HONDA: ACCORD I (SJ, SY) 1.6 L/EX (SY) 1978-1983, CIVIC I Hatchback (SB) 1200 (SB1) 1972-1977, JAZZ I (AA) 45 1.2 1984-1986
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match TOYOTA and HONDA clutch system specifications.
- OE-match design for HONDA ACCORD, CIVIC, and JAZZ applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3503, LUK 500022660, SACHS 1863803001.
- Multiple interchange numbers including RCT3360A, TK33-1K, and SF0724/2E.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to TOYOTA or HONDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
