Ordinary Release Bearing VKC2548
The DUHUI VKC2548 clutch release bearing is a direct-fit replacement engineered for Ford Escort applications. This clutch release bearing meets multiple OE specifications including R95AX7L596BA and 91AB7548BB, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2548 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: R95AX7L596BA, 95AX7L596BA, 91AB7548BB, 91AB7548BA, ECB272, 7166796, 6546467, 1057577
Reference Numbers (Interchange):
SKF: VKC2548
Timken: F-821387
Vehicle Fitment
FORD: Escort Classic (AAL, ABL) 1.6 16V (1998-2000), Escort V (AAL, ABL) 1.6 i 16V (1992-1995), Escort V Convertible (ALL) 1.6 16V XR3i (1992-1995)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Ford Escort clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Ford specifications – installs with no modifications.
- Interchangeable with LUK 500051510 and Sachs 3151889001 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Ford factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
