Ordinary Release Bearing VKC2241
The DUHUI VKC2241 ordinary release bearing is a direct replacement engineered for SKODA, VW, AUDI, and SEAT applications. This release bearing matches OE specifications including 02A141165A and cross-references with SKF VKC2241, LUK 500044010, and SACHS 3151180231.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2241 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 02A141165A, 02A141165D, 02A141165E, 02A141165H, 02A141165G, 02A141165M
Reference Numbers (Interchange):
SKF: VKC2241
Timken: 614111, F-804005, I-R238, CO181, CR1237
LUK: 500044010, 500044020
SACHS: 3151180231, 3151000388
Vehicle Fitment
SKODA: FABIA I (6Y2) 1.4 TDI 2005-2008, FABIA I Combi (6Y5) 1.4 TDI 2005-2007, OCTAVIA I (1U2) 1.8 1996-2000
VW: BEETLE (5C1, 5C2) 1.4 TSI 2011-2016, BEETLE Convertible (5C7, 5C8) 1.4 TSI 2014-2018, BORA I (1J2) 1.8 1998-2005
AUDI: A1 (8X1, 8XK) 1.4 TDI 2014-2018, A1 Sportback (8XA, 8XF) 1.4 TDI 2014-2018, A2 (8Z0) 1.4 TDI 2003-2005
SEAT: ALTEA (5P1) 1.6 TDI 2010-2015, ALTEA XL (5P5, 5P8) 1.6 TDI 2010-2015, CORDOBA (6K1, 6K2) 1.8 T 20V Cupra 2000-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for SKODA, VW, AUDI, and SEAT applications across multiple platforms.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC2241, LUK 500044010, and SACHS 3151180231.
- Multiple OE number interchange: 02A141165A, 02A141165D, 02A141165E, 02A141165H, 02A141165G, 02A141165M.
- Multiple interchange numbers including 614111, F-804005, I-R238, CO181, and CR1237.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to manufacturer factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
