Ordinary Release Bearing VKC2225
The DUHUI VKC2225 clutch release bearing is a direct-fit replacement engineered for Land Rover Defender and 110/90 series off-road vehicle applications. This clutch release bearing meets OE specifications including FRC9568, FTC2772, and FTC5200, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2225 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: FRC9568, FTC2772, FTC5200
Reference Numbers (Interchange):
SKF: VKC2225
Timken: 60TKT3901
Vehicle Fitment
LAND ROVER: 110/127 (LDH) 2.5 TD 4×4 (1986-1990), 90 I (LDV) 2.5 4×4 (1985-1990), Defender Cabrio (L316) 2.5 D 4×4 (1990-1994)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Land Rover Defender clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for FRC9568, FTC2772, and FTC5200 – installs with no modifications.
- Interchangeable with LUK 500034450, Sachs 1850282639, and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Land Rover factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
