Ordinary Release Bearing VKC2216
The DUHUI VKC2216 release bearing is an OE-replacement component designed for CITROEN, PEUGEOT, FIAT, and ROVER models with 1.0 to 2.2 liter engines from 1987 to 2016. This ordinary release bearing matches OE specifications including 2041.67 and cross-references with SKF VKC2216, LUK 500032730, and SACHS 3151826001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2216 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 2041.67, 2041.60, 2041.45, 2041.42, 2041.40, 96090882, 96050128, 91537419, 9609088280, 9617860880, GRB90257
Reference Numbers (Interchange):
SKF: VKC2216
LUK: 500032730, 500032710
SACHS: 3151826001
F-079937, I-R161, I-R150, CR1128, HD5096, CCT315, C0060
Vehicle Fitment
CITROEN: AX (ZA-_) 1.3 Sport (ZAM4A) 1987-1988
CITROEN: Berlingo / Berlingo First Box Body/MPV (M_) 1.8 D (MBA9A, MCA9A) 1996-2002
CITROEN: BX (XB-_) 11 1988-1992
PEUGEOT: 106 I (1A, 1C) 1.0 KID 1991-1996
PEUGEOT: 106 Van II Hatchback Van (1S_) 1.0 1996-2001
PEUGEOT: 205 Hatchback Van 1.7 Diesel 1994-1997
FIAT: Ducato Bus (250_) 100 Multijet 2.2 D 2006-2011
FIAT: Scudo Bus (220_) 1.6 1996-2006
FIAT: Scudo Van (270_, 272_) 2.0 D Multijet 2007-2016
ROVER: 100 / Metro Hatchback (XP) 111 C/L/S 1990-1998
ROVER: 100 Convertible (XP) 111 1994-1997
ROVER: 400 II (RT) 414 1996-1999
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for CITROEN, PEUGEOT, FIAT, and ROVER clutch systems.
- OE-match design with multiple OE number interchange including 2041.67 and 2041.60.
- Cross-references with SKF VKC2216, LUK 500032730, and SACHS 3151826001.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
