Ordinary Release Bearing VKC2144
The DUHUI VKC2144 ordinary release bearing is a direct replacement engineered for FORD and TALBOT applications. This release bearing matches OE specifications including 92BX7L596CA and cross-references with SKF VKC2144, LUK 500007110, and SACHS 3151803001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2144 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 92BX7L596CA, 83BB7548AA, 80BB7548AA, 75BB7548AA, 6134270, 6124270, 6091026
Reference Numbers (Interchange):
SKF: VKC2144
Timken: RB9582C, F-358275, I-R218, CR1161
LUK: 500007110
SACHS: 3151803001
Vehicle Fitment
FORD: CAPRI I (ECJ) 1300 (1971-1973), CAPRI II (GECP) 1.3 (1974-1977), CONSUL Coupe (GGCL) 1700 (1972-1975)
TALBOT: AVENGER 1.3 (1970-1981), AVENGER Estate 1.3 (1972-1981), SIMCA SUNBEAM 0.9 (1977-1981)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match FORD and TALBOT clutch system specifications.
- Push-type release bearing configuration ensures consistent disengagement force.
- Extensive cross-reference coverage: SKF VKC2144, LUK 500007110, SACHS 3151803001.
- Multiple OE number interchange: 92BX7L596CA, 83BB7548AA, and additional factory part numbers.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to FORD or TALBOT factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
