Ordinary Release Bearing VKC2095
The DUHUI VKC2095 release bearing is an OE-replacement component designed for FIAT, SEAT, AUTOBIANCHI, and LANCIA models with 0.8 to 1.3 liter engines from 1985 to 2008. This ordinary release bearing matches OE specifications including 7662270 and cross-references with SKF VKC2095, LUK 500002810, and SACHS 3151840001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2095 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 7662270, 5991916, 4662270, 4439919, 4304832, 4192150, X044399190, X039516640, SE141125316B, HB12621600
Reference Numbers (Interchange):
SKF: VKC2095, 445253E
LUK: 500002810
SACHS: 3151840001, 3151000123
RB9813, RB9980, F-265254, I-R083, CR1106, C0027/N, C0009, HD2303, CCT151
Vehicle Fitment
FIAT: Cinquecento (170_) 0.9 (170AB) 1991-1993
FIAT: Panda (141_) 1000 1986-1992
FIAT: Seicento / 600 (187_) 0.9 (187AXA, 187AXA1A) 1997-2008
SEAT: Ibiza I (21A) 0.9 1990-1993
SEAT: Marbella (28A) 0.8 1986-1993
SEAT: Terra (24) 0.9 1987-1996
AUTOBIANCHI: Various models – verify OE number for compatibility
LANCIA: Y10 (156_) 1.0 (156C) 1985-1989
LANCIA: Y10 (156_) 1.0 Fire All-wheel Drive (156.AD) 1986-1989
LANCIA: Y10 (156_) 1.3 i.e. (156AF) 1989-1995
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for FIAT, SEAT, AUTOBIANCHI, and LANCIA clutch systems.
- OE-match design with multiple OE number interchange including 7662270 and 5991916.
- Cross-references with SKF VKC2095, LUK 500002810, and SACHS 3151840001.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
