Ordinary Release Bearing 41421-43030
The DUHUI 41421-43030 ordinary release bearing is a direct replacement engineered for MITSUBISHI, HYUNDAI, and KIA applications. This release bearing matches OE specifications including 41421-43030 and cross-references with SKF VKC3579, LUK 500041610, and SACHS 3151832001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 41421-43030 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 41421-43030, 41421-43020, 41421-M1000
Reference Numbers (Interchange):
SKF: VKC3579
Timken: BRG713K, PRB02
LUK: 500041610
SACHS: 3151832001
Vehicle Fitment
MITSUBISHI: L 300 / DELICA II Platform/Chassis (L03_P) 2.5 D (L039P) 1986-1994, L200 (K7_T, K6_T, K5_T) 2.5 D (K64T) 1996-2007, PAJERO I (L04_G, L14_G) 2.5 TD (L044G, L049G) 1989-1990
HYUNDAI: GALLOPER I 2.5 TD 1991-1998, H-1 / STAREX Bus (A1) 2.4 1997-2004, TERRACAN (HP) 2.5 TD 2001-2006
KIA: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for L200, DELICA, PAJERO, GALLOPER, H-1, and TERRACAN applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3579, LUK 500041610, and SACHS 3151832001.
- Interchange numbers: BRG713K and PRB02.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MITSUBISHI, HYUNDAI, or KIA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
